These automatic electric suction filters, combine the advantages of high quality filtration from different water sources (sewage, reservoirs, rivers, lakes, etc.)
with self-cleaning feature, offering the customer a continuous water supply.
The filters are designed for use in a wide range of industrial, municipal and irrigation applications.
The inner element is made of stainless steel in order to withstand high dirt load and pressure. Cleaning of the screen is performed once the pressure loss (ΔP) across the filter has reached the preset value [up to 0.5 bar (7psi)].

The flushing valve opens and pressure in the flushing chamber and the dirt collector is significantly lowered resulting in a suction process via the suction nozzles to the dirt collector and from there through the flushing valve outside. The electric motor simultaneously rotates the dirt collector and moves it along its axis. The combination of the vertical movement and rotation guarantees that the suction nozzles will cover the entire internal screen surface, efficiently cleaning the screen. The whole process takes 5 seconds. 
During the whole process water supply is uninterrupted.

Standard characteristics:

• Inlet/outlet on an axis of 90°.
• Filter housing material of construction: Carbon Steel.
• The filters are electrostatically coated with polyester or epoxy powder at a thickness of 150-200 µm (micron meters) and oven cured.
• Filters are supplied with a stainless steel screen, available in varying micron size as needed: 50-3000 µm (micron meters).
• Inlet/outlet can be either:
  1. Quick coupling connectors (allowing flexibility and easy assembly)
  2. Flanged
  3. Female threaded [up to 4"/100 mm diameter]
• Maximum recommended working pressure: up to 10 bar (145 psi).
• Minimum operating working pressure during flushing: 1.5 bar (21.7 psi).
• Maximum water temperature: 65°C (149°F).
• Clean screen pressure loss: up to 0.1 bar (1.45 psi).
• Control voltage: 380 V, 3 phase, 0.5 HP.
• Control system: electric control board.
• A time basis backup (preset by the operator), guarantees that flushing cycle will occur even if the head loss has not reached the preset value.

Special Characteristics:

• High pressure range: up to 16 bar (232 psi).
• High water temperature range: 95°C (203°F).
• Anti frost: special control system for cold climate conditions.
• Electric current: 110 V, 220 V, single phase, 3 phase, 24 V and solar energy.
• Material of construction: SST-316
• Available controllers: electronics, timer, air actuated, computerized and custom design.

1. Piston
2. Motor
3. Motor adaptor
4. Cover
5. Flushing valve
6. Flushing chamber
7. Body
8. Collector
9. Suction nozzle
10. Junction box
11. Pressure gauge
12. Control cabinet








Technical Data: