Applications: In-line back-up filter after sand/gravel filter
Standard Characteristics:
- Filter element: - Stainless Steel screen AISI 316 mesh, supported by a PVC cylinder
- Available disc elements: 2”, 3” & 4”
- Available filtration grade: from 120 micron
- Filter housing construction material: Carbon Steel ST37.2
- Pre-treatment: sand blasting up to Sa 2.5 grade
- Exterior & Interior coating: electrostatic oven baked polyester-epoxy powder coating with a thickness of 150-200 micron
- Connections: VIC, Threaded socket and Flange
- Maximum pressure: 10 bar (145 psi)
- Maximum recommended working pressure: up to 8 bar (116 psi).
Operation:
The filters have been designed and built in accordance with the principle of water flow through the cylinder screen openings while solid particles are trapped by the screen. These particles can be removed by flushing through a drain valve or by opening the cover and washing the screen manually.
During back-flushing, the filtered water is reversed through the back-flush filter to the sand/gravel filter.
1.Body
2.Lower gasket
3.Screen
4.Rubber band
5.Central adaptor
6.Upper gasket
7.Handle
8.Tightening bracket
9.Cover
10.Pressure test point
11.Ball valve
Model
Numbe |
In/Out
Diameter
[mm] |
In/Out
Diameter
[inch] |
Recommended
Flow Rate
[m3/hr] |
Recommended
Flow Rate
[gpm] |
Packing Weight
[Kg] |
Packing Weight
[lb] |
Operation Weight
[Kg] |
Operation Weight
[lb] |
Packing Volume
L×W×H [m] |
Packing Volume
L×W×H [ft] |
Technical Drawings
Metric
Units |
Technical Drawings
U.S.
Units |
| F320 |
50 |
2 |
15-25 |
66-110 |
16 |
35 |
20 |
44 |
0.55x0.32x0.29 |
1.8×1.0×0.9 |
PDF |
PDF |
| F330 |
80 |
3 |
30-50 |
122-220 |
30 |
66 |
40 |
88 |
0.67x0.55x0.32 |
2.2×1.8×1.0 |
PDF |
PDF |
| F340 |
100 |
4 |
50-90 |
220-400 |
42 |
93 |
64 |
141 |
0.84x0.64x0.32 |
2.8×2.1×1.0 |
PDF |
PDF |
